linkage help

I am running a 6-71 with a single 4150 on a 350sbc and a weiand 3 hole butterfly scoop can any one help with some pics of the linkage for a similar set up
Thanks
:eat:

Here's a single carb. Whipple mounted sideways. Just pick up an erector set(Enderle linkage) :shift:
http://www2.***boat.com/image_center...31DSC00294.jpg

I am running a 6-71 with a single 4150 on a 350sbc and a weiand 3 hole butterfly scoop can any one help with some pics of the linkage for a similar set up
Thanks
:eat:
if the carb is mounted in-line...just get the plate that goes under the carb (it has the clip for the morse cable to hold it in-place)...Summit Racing..$23 complete...i have 1 on a sgl tunnel ram...works great..."Simple is Better!"
fastrat

I just bought that Enderle linkage thanks for the pic
Royz

I just bought that Enderle linkage thanks for the pic
Royz
unless ur carb is mtd sideways & i dont know why it would be!...u just spent $100 for linkage u didnt need...must be nice to be rich & throw ur money away!...the carb plate works just fine & is suitable for any sgl 4bbl application
fastrat

In my case I had to get the cable angle down for hatch clearance. Also the skinny little Whipple looked weird with the carb. in-line. :wink:

unless ur carb is mtd sideways & i dont know why it would be!...u just spent $100 for linkage u didnt need...must be nice to be rich & throw ur money away!...the carb plate works just fine & is suitable for any sgl 4bbl application
fastrat
Easy...easy...
To each their own bud.
Brian

hey not sure why your so upset you dont know all the facts i have a nitrous plate so your idea would not work the Enderle linkage is fine ,and as i have $17k in my motor $100 is small change to get a good operating system and no i am not rich just worked hard with 3 jobs and saved to build an 830 horse sbc which should be more than enough to deal with any fastrats around. :crossx: :yuk: :yuk: :yuk: :yuk: :yuk: :yuk:

:D lol

Google CSR Throttle Cable Brackets