-
anyone out there have any helpful hints or tricks to seperate the droop from the bowl where the wedge is? its a berkeley 12jg with like the 8 bolts that hold the droop on. ive beating it with a rubber mallet, heating it a little bit and trying to drive a screwdriver between the wedge and droop. nothing will make this thing budge.
-
anyone out there have any helpful hints or tricks to seperate the droop from the bowl where the wedge is? its a berkeley 12jg with like the 8 bolts that hold the droop on. ive beating it with a rubber mallet, heating it a little bit and trying to drive a screwdriver between the wedge and droop. nothing will make this thing budge.
WOW...what kind of sealer did u use?...there should be no sealer or gasket between them & it should come rite off...my only suggestion is...take the studs out that are holding the droop in place & then smack it a little (not too hard) & it should come off
fastrat
-
Give me a call, I may be able to help !!!
928-704-1158
Jim
-
anyone out there have any helpful hints or tricks to seperate the droop from the bowl where the wedge is? its a berkeley 12jg with like the 8 bolts that hold the droop on. ive beating it with a rubber mallet, heating it a little bit and trying to drive a screwdriver between the wedge and droop. nothing will make this thing budge.
Get a 2 inch putty knife ..... the kind you can use a hammmer on the handle to drive it in.......Presto................had the same problem
Bryan
-
Sweet Thanks Guys, Going To Dive In Again After Work Here In About An Hour. If It Wont Go, I'll Give You A Call Squirtin Thunder. Thanks For Offering The Help!
-
6 LB DEAD BLOW FORD WRENCH ! WORKS EVERY TIME!! :hammer2:
-
If it's an Aggressor Droop, you might want to be careful when hitting it... :hammer2:
HBjet :D
-
If it's an Aggressor Droop, you might want to be careful when hitting it... :hammer2:
HBjet :D
LMFAO!!!!!!! NICE Randy!!!!!!!
-
LMFAO!!!!!!! NICE Randy!!!!!!!
Yup that was pretty danged phunny.
-
If it's an Aggressor Droop, you might want to be careful when hitting it... :hammer2:
HBjet :D
Dats sum funny shit rite dare,I don't care who you are ......."get'r' done"!!
Markist