-
I Am In The Middle Of Building A Blower Motor For My Jet Boat And Am Looking For Some Info On What Lobe Center,duration,lift Cam Would Be Best To Run. A Little Engine Info Its A 455 Olds With Custom Tunnel Ram Blower Manifold And Bored .030 Over The Crank Has Had Dual Key Ways Cut Into It Compression Is 10:1 Forged Pistons Toatal Seal Gapless Rings All The Oil Mods Have Been Done Including Oil Cooler 10q Pan And Dual Remote Filters 2.25 Primary Headers. I Have A 671 That Hampton Is Seting Up Was Planing On Runnig Edelbrock 750cfm Carbs All Mallory Ignition. Any Info On Cam Specs Would Be Great
-
Can you get flow numbers to see what the heads will move air wise?
-
Got pictures. I'd love to see that 455 with a blower.
-
Yeah I Can Get The Flow Numbers At Lunch
As Far As Pic I Dont Have The Blower Back Yet But When I Get It I Will Try To Post The Completed Project
-
Got pictures. I'd love to see that 455 with a blower.put your tools away and leave that olds alone Kevin lmao
-
The Heads Are E Casting With 2.07 Intake An 1.680 Exhaust Acordin To Monelloes The Work They Did Should Flow 250 Cfm At .550 Intake And 165 Cfm At .550exhaust Any Info Would Help
-
455 Olds, 10:1 comp., Olds cast iron heads, custom tunnel ram intake, 6-71 Blower, Edelbrock carbs...... hmmmmm :idea:
-
Just Doing Something A Little Different You Never See A Blower On A Olds So I Thought I Would Give It A Try Everybody Says You Cant Turn A Olds Hard But The One I Built Has Been Turned 6500 For Long Periods With Out Any Issues For 2 Seasons So I Thought What The Hell
-
Just Doing Something A Little Different You Never See A Blower On A Olds So I Thought I Would Give It A Try Everybody Says You Cant Turn A Olds Hard But The One I Built Has Been Turned 6500 For Long Periods With Out Any Issues For 2 Seasons So I Thought What The Hell
WOW. So what you have in this Olds. What pump and impeller you have to spin it to 6500.
-