Results 1 to 5 of 5

Thread: Air Filter flow tests

  1. #1
    Duck
    A Diesel Place boarder arranged for air filter tests on many major brands (except Fram-couldn't). Tests were performed on a very expensive test bench with two types of dust. The results are very interesting and a must read. If your in a hurry, read the first page, then go to page four.
    http://dieselplace.com/forum/forum_p...642&PN=1&TPN=5

  2. #2
    Outnumbered
    Originally posted by Duck
    A Diesel Place boarder arranged for air filter tests on many major brands (except Fram-couldn't). Tests were performed on a very expensive test bench with two types of dust. The results are very interesting and a must read. If your in a hurry, read the first page, then go to page four.
    http://dieselplace.com/forum/forum_p...642&PN=1&TPN=5
    Great info. Thanks for the link.
    OL

  3. #3
    BowTie Rick
    I had no choice but to get involved in this one. What a crock of BS. A product sponsored site doing independent tests is like having the fox watch the chickens. I'd bet a boat payment this was done by a dealer or employee of the web site sponsor's company. My posts are at the end of the thread. Never ever trust a product sponsored site as having unbiased threads. I can prove them 100% wrong but am not allowed to release the figures due to our legal dept. They are saving that ammo for a later date.

  4. #4
    Outnumbered
    Originally posted by BowTie Rick
    I had no choice but to get involved in this one. What a crock of BS. A product sponsored site doing independent tests is like having the fox watch the chickens. I'd bet a boat payment this was done by a dealer or employee of the web site sponsor's company. My posts are at the end of the thread. Never ever trust a product sponsored site as having unbiased threads. I can prove them 100% wrong but am not allowed to release the figures due to our legal dept. They are saving that ammo for a later date.
    BTR, what is the date of release? I would like to see the results of K&N test results. Seems a little fishy that K&N and AFE would do so poorly. Seems K&N would have been called on this long before now. Two sides to every story.
    OL

  5. #5
    BowTie Rick
    Hell if I know. All I know is that the CEO wants it to happen soon because he is sick of crap like that. It will open some eyes, that is for sure. I'll let a bit out of the bag. Most big name filters are all about the same with a handful of exceptions. One on the better side and more on the down side (most non US made too). We are in the upper part of the pack on the good side. How's that for vageness? I should go into politics

Similar Threads

  1. Oil Filter # for 460? Short filter? Weight oil?
    By stashtrey in forum Jet Boats
    Replies: 18
    Last Post: 05-29-2006, 09:09 AM
  2. Hot Boat Tests???
    By the_gray_goose in forum Cats & Tunnels
    Replies: 15
    Last Post: 10-11-2005, 02:40 PM
  3. Guy Tests
    By cxr133 in forum Sandbar
    Replies: 35
    Last Post: 09-09-2005, 01:56 PM
  4. Mixed Flow vs Axial Flow vs Multi-Stage...
    By WheelerDealer in forum Jet Boats
    Replies: 6
    Last Post: 10-29-2004, 04:44 AM
  5. Oil filter flow????
    By Craig in forum Gear Heads
    Replies: 4
    Last Post: 01-19-2002, 05:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •