Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: I need a boat re gel coated?

  1. #1
    Jrocket
    A good friend of mine needs to find a good gel coater.His boat is out at Quality boat repair in Mira loma and they havent touched it since the end of January.Hes already paid 80% of the money up front and its at a stand still.The boat is prepped and ready to be sprayed from what Ive been told.Hes ready to tow it out of there and have somebody else finish it up.Its a 25 Daytona.Probably needs to be taped and finished from there.
    Anybody have any phone numbers of a shop that he can call to get it done or helped out?

  2. #2
    burtandnancy
    Pats Fiberglass on 13th St in Upland. But your timing sucks...

  3. #3
    BoatFloating
    Originally posted by Jrocket
    A good friend of mine needs to find a good gel coater.His boat is out at Quality boat repair in Mira loma and they havent touched it since the end of January.Hes already paid 80% of the money up front and its at a stand still.The boat is prepped and ready to be sprayed from what Ive been told.Hes ready to tow it out of there and have somebody else finish it up.Its a 25 Daytona.Probably needs to be taped and finished from there.
    Anybody have any phone numbers of a shop that he can call to get it done or helped out?
    One of the best I've seen is Manny Flores. He's in Corona 909-520-0208. He fixed a boat for me that I thought was un-fixable

  4. #4
    Jrocket
    Pats Fiberglass? Ill have him check into that one.
    I thought of Manny,Orange County boat repair,and that place in Havasu but cant remember the name.

  5. #5
    77charger
    get a hold of toddnjuzz(trg fiberglass) guy here on the boards.I have seen his work and it is very good.

  6. #6
    Jrocket
    Originally posted by 77charger
    get a hold of toddnjuzz(trg fiberglass) guy here on the boards.I have seen his work and it is very good.
    I got his phone number from his profile.ill pass it along.

  7. #7
    WILDERTHANU
    DON @ PATS FIBERGLASS IS ONE OF THE BEST AROUND....(909)946-3089. DO IT RIGHT THE FIRST TIME!!! HE'S RIGHT BY CABLE AIRPORT IN UPLAND.

  8. #8
    Jrocket
    Originally posted by WILDERTHANU
    DON @ PATS FIBERGLASS IS ONE OF THE BEST AROUND....(909)946-3089. DO IT RIGHT THE FIRST TIME!!! HE'S RIGHT BY CABLE AIRPORT IN UPLAND.
    Thanks you wild man.Ill have him call tomorrow.

  9. #9
    jbtrailerjim
    Sorry to hear Israel is dicking your friend around. He does great work but he is a flakie focker. He has done a lot of work on my dads boat and both times he was not done even close to the time he promised it. It was know where near as long as your buddy is getting dicked around for. But my pops did not give him no 80% of the money without being even close to being finished.
    Ask Grass Pay$ how long it took to get his old Eliminator re-geled. I know he was about ready to go down and strangle that little focker.

  10. #10
    Jrocket
    Ive delt with Israel before also.I dropped my boat off and it sat for 3 weeks and never got touched.The whole job was only going to take 4 days! Every time that you try to reach him hes in Mexico or out of the office.My buddy is getting screwed hard.He wants to get the boat out and over to someone else and he will deal with Israel later on it.
    Really a bad deal.

Page 1 of 2 12 LastLast

Similar Threads

  1. coated zoomies
    By 469 the coyote in forum Parts 4 Sale
    Replies: 38
    Last Post: 11-04-2007, 12:04 AM
  2. Coated pistons
    By SED253 in forum Gear Heads
    Replies: 3
    Last Post: 09-19-2007, 08:09 AM
  3. Coated or Chrome?
    By 1980Cougar in forum Jet Boats
    Replies: 31
    Last Post: 02-07-2007, 08:10 PM
  4. Replies: 16
    Last Post: 01-13-2007, 10:37 AM
  5. Gel coated my boat this weekend
    By BrendellaJet in forum Jet Boats
    Replies: 12
    Last Post: 10-02-2004, 08:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •