Results 1 to 8 of 8

Thread: Damn Ford engineers!!

  1. #1
    sandblasted
    Did my 1st fuel filter change on my powerstroke last night...
    I have never wanted to shoot someone as badly as I did last night.....Namely the engineer at ford that designed the fuel filter location along the frame under the truck!! It seems like a good spot until you try to work on it!
    1st you have to take out the drain plug with a 6mm hex wrench, not too bad but then I had to remove the filter cap...
    Damn ford jerks put a fuel line right in front of the cap and the drive shaft is in the way also...
    I'm sure there is a wrench specifically for this filter cap but I don't have it...yet!! So I used a crescent wrench and a vice grip, since nothing else in my toolbox would fit the end of the cap...
    Talk about a pain in the ass!!
    I had to turn the cap about 3/4 inch with the vice grip then I could use the crescent wrench for another inch , maybe!...when I finally got the cap off I had to wrestle it out past the fuel lines..Oh yeah, as soon as I got the cap loose diesel fuel dripped out along the frame and no matter where I laid it dripped on me!!
    Thank God the 2nd filter on top of the engine is easy to change..
    Lastly, F**k Ford for trying to charge $90 for 2 fuel filters....I found some online for $42 at Shopdeisel.com and still cannot believe I paid that much for 2 damn filters!!

  2. #2
    riverbound
    There are 2 fuel filters? I have always changed the top one only

  3. #3
    sandblasted
    Originally posted by riverbound
    There are 2 fuel filters? I have always changed the top one only
    There are 2 for the new 6.0 powerstroke...I believe the 7.3 only has 1..

  4. #4
    JetBoatRich
    Greg, I have not changed mine yet, but heard the one down below was a bear to get out and was messy
    I assume no other problem with your truck?

  5. #5
    sandblasted
    Originally posted by JetBoatRich
    Greg, I have not changed mine yet, but heard the one down below was a bear to get out and was messy
    I assume no other problem with your truck?
    I'll share the grimy details with you at your party tonight!!

  6. #6
    JetBoatRich
    Originally posted by sandblasted
    I'll share the grimy details with you at your party tonight!!
    I just read this, so I missed the details
    Thank you and Mary again for coming by last night, had a good time.

  7. #7
    sandblasted
    Originally posted by JetBoatRich
    I just read this, so I missed the details
    Thank you and Mary again for coming by last night, had a good time.
    The party was fun...I learned I have to improve my horseshoe throwing skills though!!

  8. #8
    JetBoatRich
    Originally posted by sandblasted
    The party was fun...I learned I have to improve my horseshoe throwing skills though!!
    I find luck in horse shoes Paul and I were undefeated

Similar Threads

  1. Anyone looking for Design Engineers??
    By GUGS102 in forum Sandbar
    Replies: 0
    Last Post: 10-09-2007, 10:04 AM
  2. damn FORD 6.0il leaker!!!!!
    By riverroyal in forum Sandbar
    Replies: 101
    Last Post: 01-08-2007, 07:30 PM
  3. Any surveyor/engineers on here that..
    By buzzaro in forum Sandbar
    Replies: 8
    Last Post: 07-12-2006, 05:47 PM
  4. Civil Engineers
    By Quality Time in forum Sandbar
    Replies: 9
    Last Post: 01-27-2005, 11:21 AM
  5. Lookin' for two engineers
    By 24RODjr in forum Sandbar
    Replies: 5
    Last Post: 12-18-2002, 12:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •