access technologies remote

[Essex29]

What stereos do these work with?
access tech... (http://www.access-tech.net/productsRemoteCom.htm)

[ROZ]

All Sony that have the wired remote option, and Pioneer Premier 04 and up that have the steering wheel remote option.
You can run most brands of stereos that have an IR remote by using a PAC adaptor. I think it's the SC1
http://www.pac-audio.com/products/images/SC-1.jpg
The SC-1 is a learning IR remote which will interface Access Technologies MRC-2 or RC-1B marine commanders. It wil allow you to control most aftermarket stereos that comes with an IR remote with the marine commanders. The MRC-2 and RC-1B was originally designed to control Sony's line of headunits, until now. The SC-1 allows you to control Alpine, Kenwood, Pioneer, Clarion or most other brands of stereos. Comes with 1/8" jack to allow the MRC-2 or RC-1B to plug into directly. Will also work for Sony's RM-X2S, RM-X3S and RM-X4S rotary commanders.
Note: The SC-1 interfaces will only work with infrared remotes that use the common 38-40kHz carrier frequency. Consult with equipment manufacture to determine the carrier frequency.

[Essex29]

All Sony that have the wired remote option, and Pioneer Premier 04 and up that have the steering wheel remote option.
You can run most brands of stereos that have an IR remote by using a PAC adaptor. I think it's the SC1
http://www.pac-audio.com/products/images/SC-1.jpg
The SC-1 is a learning IR remote which will interface Access Technologies MRC-2 or RC-1B marine commanders. It wil allow you to control most aftermarket stereos that comes with an IR remote with the marine commanders. The MRC-2 and RC-1B was originally designed to control Sony's line of headunits, until now. The SC-1 allows you to control Alpine, Kenwood, Pioneer, Clarion or most other brands of stereos. Comes with 1/8" jack to allow the MRC-2 or RC-1B to plug into directly. Will also work for Sony's RM-X2S, RM-X3S and RM-X4S rotary commanders.
Note: The SC-1 interfaces will only work with infrared remotes that use the common 38-40kHz carrier frequency. Consult with equipment manufacture to determine the carrier frequency.
without having the model # would you know if the Alpine decks from 2-3 years ago work?

[ROZ]

without having the model # would you know if the Alpine decks from 2-3 years ago work?
Chances are that it will work fine. I have several Alpine remotes of different model years in my garage that worked the other's headunit... Shouldn't be a problem.. The module there is basically a learning IR repeater system....

[RiverDave]

Incidentally I have a whole bunch of these Bezels laying around that I'd like to sell.
http://www.riverratlife.com/dave/ima...l/DSC00006.jpg
http://www.riverratlife.com/dave/ima...l/DSC00007.jpg
I also had a run of them annodized that DCB Pewter color (had a friend that needed a set for his DCB) so if you have a DCB hit me up.
RD

[INSman]

Incidentally I have a whole bunch of these Bezels laying around that I'd like to sell.
http://www.riverratlife.com/dave/ima...l/DSC00006.jpg
http://www.riverratlife.com/dave/ima...l/DSC00007.jpg
I also had a run of them annodized that DCB Pewter color (had a friend that needed a set for his DCB) so if you have a DCB hit me up.
RD
Can I see a picture of the bezel without the marine commander attached ?

[ROZ]

I'm sure RD will post one for you, but the bottom of the bezel is just flat with 2 screw holes for the remote's screws to pass through and a large hole for the remote's wire nub to pass through.. The remote's mounting hardware is what holds the unit in place. It looks and attatches micely

[RiverDave]

Can I see a picture of the bezel without the marine commander attached ?
Here's a picture of one next to one that was installed on a new magic deck boat.
http://www.riverratlife.com/gallerie...show%20316.jpg
RD

[Essex29]

Chances are that it will work fine. I have several Alpine remotes of different model years in my garage that worked the other's headunit... Shouldn't be a problem.. The module there is basically a learning IR repeater system....
I just checked it out and it is Alpine model 9827...still think it will work?

[Procraftkev]

Roz, How much is the SE-1 unit?