We Use Graphite as our Packing Set. It has the Highest RPM rated. Not sure what you mean in Teflon.
has any one tryed teflon packing or g.f.o. packing?
We Use Graphite as our Packing Set. It has the Highest RPM rated. Not sure what you mean in Teflon.
Ya might want to check out this product...i like it alot. try this for a link to read more about the fiber packing. http://164.109.56.82/english/ipd/sea...GFO_Marine.cfm I used a 5/16 diameter packing that came 4 foot long. Enough for your friends! Its square type of rope...no wax or metal in it, and ya use it as any type of packing. What I did was wrap a piece around the shaft so the ends would butt, get my measurement, cut it. I think I fit 5 or six in the pump, one at a time and ya must stager the seams! Top to bottom or left to right whatever. Then just snug down on the packing bolts (evenly)...not to much. Do a run on the pump snug down the bolts one or two more times...thats it, never had to look at it again. http://164.109.56.82/english/ipd/sea...GFO_Marine.cfm
HammerDown
How much does a roll cost?
[This message has been edited by spectras only (edited April 26, 2002).]
thanks! the gfo is graphite packing. i wasent sure about sucking air or temp
gfo is good to 550 so iam going to try it!
I was wondering if anyone ever used
Dichronite or HardChrome as well..
RD
Originally posted by spectras only:
How much does a roll cost?
I belive it was about 25.00 for a 4 foot roll.
[This message has been edited by spectras only (edited April 26, 2002).]
i will find out how much it cost on monday.
the shop next to us sell it!