Info on the TCM 1200

[WetWillie]

Jeff / Charley,
A little info for you!
TCM1200 displaces 565 cubic inches and has a max operating (WOT) of 6200 to 6600 rpm's The Block is a Merlin III four bolt splayed main caps and 10.200 deck height. Brodix alum heads topped with a pair of 3.3 Whipples superchargers and innercoolers and twin Holly 4500's. Ignition is complete msd marine and Soft touch rev control. Crane solid roller cam.
What RPM were we at at 113?
Not sure if its a solid lifter motor?? Anyone know?

[jackpunx]

It has to be solid to run that many RPM's with that much power..

[UnionJack]

It that what teague put in his boat?

[Three Days Only]

Solid Roller Cam!!!!
6200 at 113
Smaller Pullies, bigger prop. Your in like flynn.
Your motor is detuned (running low boost). Crank up the boost, turn a bigger wheel ( up 2 pitches) she will run 120

[UnionJack]

What boost are you pullin? I am at 5 lbs. What is the difference in boost with 1000hp and 1200 hp?

[jackpunx]

Solid Roller Cam!!!!
6200 at 113
Smaller Pullies, bigger prop. Your in like flynn.
Your motor is detuned (running low boost). Crank up the boost, turn a bigger wheel ( up 2 pitches) she will run 120
whats the CI and boost?

[jackpunx]

What boost are you pullin? I am at 5 lbs. What is the difference in boost with 1000hp and 1200 hp?
you need 12lbs for 1200HP

[UnionJack]

565 ci

[jackpunx]

565 ci
Im 540 and running 12lbs.. just under 1200

[UnionJack]

myself, 509 w/ 5 lbs @ 800