Rail Kits???

[Bense468]

Just wondering if you guys know anyone out there besides CP that is producing Rail Kits and trick motor plates with nice feet? I am looking into having some custom made. Do any of you know where I could start? Thanks in advance

[Kwicherbichen]

I heard HBjet just got a rail kit. Email him for the details.
Brian

[LVjetboy]

Hi Bense,
Rex has some 30" rails...seems a little short but they do have them. Also the front and rear plates and little feet in 2" size. Looks like they will discontinue the 1.5's. Don't think they have a "kit" like CP but you could buy separate.
jer

[Unchained]

Rail kit sounds cool but the material is just aluminum angle. I took out the pieces of swiss cheese that someone who didn't know how to measure had used before, and bought aluminum angle and made new mounts as well as a new front engine mount plate. It isn't rocket science. Just a matter of laying out hole patterns and drilling holes. I ran the aluminum angle from the transom all the way forward to the bulkhead and mounted the seats to it also. I have less than a hun in material.
[This message has been edited by Unchained (edited March 11, 2002).]

[flat broke]

Bense,
HB picked up his rail kit from Tom Papp. You'd have to email him for the price details, but the kit was very complete including all fasteners etc.
Chris www.liquidaddiction.net (http://www.liquidaddiction.net)

[JohnATJmmarine]

Originally posted by flat broke:
Bense,
HB picked up his rail kit from Tom Papp. You'd have to email him for the price details, but the kit was very complete including all fasteners etc.
Chris www.liquidaddiction.net (http://www.liquidaddiction.net) I got the rail kit for HBJET and he picked it up at Tom Papps shop. If anyone needs a rail kit at a good price contact John at J&M Marine. Thanks

[superdave013]

If anyone is in the OC area you have to check out Schorr Metals. They have the best rem/scrap bin I have ever seen. It's only a 1.90 a pound.
If you need to have anything cut on a mill let me know and I'll help you out.

[flat broke]

Originally posted by JohnATJmmarine:
Originally posted by flat broke:
Bense,
HB picked up his rail kit from Tom Papp. You'd have to email him for the price details, but the kit was very complete including all fasteners etc.
Chris www.liquidaddiction.net (http://www.liquidaddiction.net) I got the rail kit for HBJET and he picked it up at Tom Papps shop. If anyone needs a rail kit at a good price contact John at J&M Marine. Thanks
Sorry about that John, Didn't mean to steer anyone in the wrong direction.
Chris www.liquidaddiction.net (http://www.liquidaddiction.net)

[JohnATJmmarine]

Originally posted by flat broke:
Sorry about that John, Didn't mean to steer anyone in the wrong direction.
Chris www.liquidaddiction.net (http://www.liquidaddiction.net) No problem. Just wanted my props from HBJET. Just joking.

[1riverrat]

Try lighting performance marine http://www.boatheaders.com/index.htm