I Just Had To Post This!

[GofastRacer]

but the paint job looks cool :messedup:
If you like that color!.LOL...

[Infomaniac]

Springs not in their seats? I just thought they were bent. Bent sorings.

[Infomaniac]

Are those 5/16 push rods in 3/8 guide plates? Hard to tell by pics.

[Sleek-Jet]

So since we're on the subject, what's the best way to check installed height on valves??

[GofastRacer]

Are those 5/16 push rods in 3/8 guide plates? Hard to tell by pics.
Yep, they will be changed out!.

[GofastRacer]

So since we're on the subject, what's the best way to check installed height on valves??
I use a snap guage, one of these days I'll get a height mike!.

[steelcomp]

So since we're on the subject, what's the best way to check installed height on valves??
The best way is with a valve height mike, before assembly, but you can use a pair of calipers or a machinist's scale after they're put together.

[Sleek-Jet]

OK, that's what I was thinking... thanks guys..

[steelcomp]

Are those 5/16 push rods in 3/8 guide plates? Hard to tell by pics.
Good eye, Info. Missed that one.

[steelcomp]

I use a snap guage, one of these days I'll get a height mike!.
Lots of guys do. They work just fine. :coffeycup