Hi all this is my motor project. I have this up posted over at The Inside Line.com Sorry if you have allready sean it. Didn't get a lot of intrest so I thought I'd see what you guys think.
I thought I would show ya'll what I'v been up to this winter. My boat is a 2004 Wyatt's Performance 24' Lightning. When I bought the boat from Wyatt it had a 496" BBC w/ a 850 carb and 100 hp shot of nitrous. The boat ran good , it would run 104 mph w/ perfect conditions. That was pretty good but I wanted more. I called a good friend of mine Bert at Moore Machine Shop, and we started ordering parts.
This is how the boat looked
http://www.hotboatpics.com/pics/data...52P1010267.JPG
The first thing we ordered was a set of Brodex BB2+'s w/ big valves and 750 # springs. the exhaust valves are Inconell. Bert did a full port job on the heads and I polished the ports and the combustion chambers.
http://www.hotboatpics.com/pics/data...odex_heads.JPG
http://www.hotboatpics.com/pics/data...aust_ports.JPG
http://www.hotboatpics.com/pics/data...take_ports.JPG
After the port and pollish Bert had redo the valve job
http://www.hotboatpics.com/pics/data..._valve_job.JPG
http://www.hotboatpics.com/pics/data...2valve_job.JPG