Reply With QuoteCheck your PMs. I have some I might trade.
I need the 2 arms that connects to the nozzle of a place diverter. Its the arm that holds the diverter cable and steering. The other one is for the reverse cable. If anyone has one laying around please let me know. I need to find a used chaep one.
396
Check your PMs. I have some I might trade.
Check 'em again and give me a call or PM.
Bumpity-bump.
Hey Michael, we gonna do this or not?
Bumpity-bump.
Hey Michael, we gonna do this or not?
Check your pm's budWe might have to trade everything except for the up and down part of the diverter. That means you will be getting my polished piece(left and right) :cry: :cry: I will have to spend some more time in the polisher
396
Got the PM. If you want to just do the brackets and reverse gate that will work just as well for me AND save you that polisher time.
Got the PM. If you want to just do the brackets and reverse gate that will work just as well for me AND save you that polisher time.
The problem is that the mounting holes are different. I have 2 and you have one. Let me check on that on tuesday and I will let you know. I will be needing them asap so I can polish them
396
The mounting holes for the steering arm and reverse cable bracket are the same! Steering arm you need bolts on at the top and the left side. This piece includes the trim cable mount. The reverse cable bracket uses the same three holes on the trim nozzle that your current setup uses.
ok here are your pics.....
396
http://hometown.aol.com/CTC100M/nozzle1.jpg
http://hometown.aol.com/CTC100M/nozzle2.jpg
http://hometown.aol.com/CTC100M/nozzle3.jpg[/
Posting Permissions