#12 line off the ride plate with two number 10s dumping mine runs a nice 6 lbs pressure at 3500 rpm and 10 psi at 6000
Intercooler Hookup?
--------------------------------------------------------------------------------
I know there is a forum for Blowers and such but i was wondering how some of you jet guys hook up your intercoolers. I just got mine in and i am in need of some ideas. thanks
Mo.
#12 line off the ride plate with two number 10s dumping mine runs a nice 6 lbs pressure at 3500 rpm and 10 psi at 6000
Wich pickup do i use?
Use a water bypass valve to cut the pressure down to your engine and split the bypassed water into two # 10 lines. Put this water into the lower ports on the front of the inter cooler. Then run 2 # 12 lines overboard. This shuts off the cold water at idle so as not to make it back fire like a cold engine, and then cools down the charge in about 2 or 3 seconds after you throttle it. Just another way to do it. The above way by wideopen works too.
Hey duane do you know where i can find that valve? I would rather do this then cut a hole for a pickup. thanks
Mo
Read your PM.
Read your PM.
Oh c'mon, just spam it! Chet aint around. Im interested in one too!