Autolite 25 or 26 plugs
The numbers on the heads looks like D3VE-A2A. Its mostly stock,600cfm (soon to be 750), Edelbrock torker intake. Just in case that info helps.... Also what gap should i be runnin? and finally, Any help on my other forum "Setting up 460 Ignition system" would be great.....
Autolite 25 or 26 plugs
Lakecrazy is correct Blue Ovals love autolite plugs, I ran 'em in my 500 inch progasser , never a problem.
What gap should i be runnin??
Depend's on what ignition you are running, stock or hei type the gap should be 35, mag will be tighter at about 20 or so.
My ignition is a Mallory electronic coil and dist. Whats HEI?
[This message has been edited by AntRant (edited December 29, 2001).]
antrant, hei, is an ignition that has the coil built into the distributor, similar to your mallory in performance but not widely used in racing applications, the mallory you have is one I have used and still do on my lake boats, the plug gap I used for this ignition is .035, be sure to check the manufaturers instructions to see if a ballast resistor is required, because if it does and you don't have one you can destroy the module in your distributor, replacements are kind of pricey.