looking for bucket seat mounts....

[steelcomp]

Any body have any seat mounts they can get rid of?? Stringer mounts for fiberglass buckets....or how 'bout just some alum angle? Local guy here wants WAY too much for the angle...thought I'd try the boards.
Thanks.

[wsuwrhr]

Any body have any seat mounts they can get rid of?? Stringer mounts for fiberglass buckets....or how 'bout just some alum angle? Local guy here wants WAY too much for the angle...thought I'd try the boards.
Thanks.
Aluminum is getting to the 3. per pound mark. Not looking good.
Do you need any thicker than say 1/4?
Brian

[steelcomp]

Aluminum is getting to the 3. per pound mark. Not looking good.
Do you need any thicker than say 1/4?
Brian
No way...1/4 would be fine. I need 3" X 3", or 2.5" X3", four pcs about 8" long. I just saw that Canyon Marine has them for $25/pr...that's $50 bucks for four lousy pieces of alum!!! (Not baggin on Cyn. Marine...price of alum. is outrageous!)
Got any?

[GofastRacer]

Well I just made these and it costed me $20 for the material!..
http://www2.***boat.com/image_center...t_Brackets.jpg

[wsuwrhr]

No way...1/4 would be fine. I need 3" X 3", or 2.5" X3", four pcs about 8" long. I just saw that Canyon Marine has them for $25/pr...that's $50 bucks for four lousy pieces of alum!!! (Not baggin on Cyn. Marine...price of alum. is outrageous!)
Got any?
Too bad you are so far away. I have 20+ feet from what I bought to do Haters boat.
You should be able to buy the angle you need from any big metal house.
Brian

[MAXIMUS]

Well I just made these and it costed me $20 for the material!..
http://www2.***boat.com/image_center...t_Brackets.jpg
ALL RIGHT THATS IT!!!! Art post some damn pics of that gn so I can do a little drueling! :notam:

[johnmiller]

Go to McCarthy tank and Steel in SLO or S.M. Look for remenents.

[GofastRacer]

ALL RIGHT THATS IT!!!! Art post some damn pics of that gn so I can do a little drueling! :notam:
Ben, you already seen what I've got done so far, won't be till after summer before I get back to it, got too much other stuff to do first and I have to get this Nordic done and outa here!..

[steelcomp]

Go to McCarthy tank and Steel in SLO or S.M. Look for remenents.
Thanks John...called Ventura Metal...they're UPS'ing some for me today. I'll remember the name for future ref., though. I'm new to the north county...don't have many connections yet.

[steelcomp]

Too bad you are so far away. I have 20+ feet from what I bought to do Haters boat.
You should be able to buy the angle you need from any big metal house.
Brian
Thanks Brian...got it covered.