Results 1 to 5 of 5

Thread: >>>HELP...REMOTE STARTER...<<<

  1. #1
    rvrpig
    I WAS GIVEN A REMOTE STARTER FOR MY TRUCK LAST CHRISTMAS. THE COMPANY THAT MAKES IT IS (BULLDOG SECURITY). THIS THING HAS ALL THE BELLS AND WHISTLES ON IT. BUT THE PROBLEM IS i CAN NOT GET IT TO FUNCTION CORRECTLY. 90% OF THE WIRING IS DONE...THE TRUCK TRIES TOSTART BUT WONT.
    DOES ANY ONE HAVE A HOOK UP ON A PLACE TO TROUBLE SHOOT MY REMOTE STARTER AND FINISH THE WORK AND PROGRAMMING. I HAVE GIVEN UP ON FINISHING IT MY SELF.....I REALLLLY NEED HELP ON THIS ONE.

  2. #2
    Mr. Naudio
    12volts red (x2) + ignition harness
    Starter yellow + ignition harness
    Second Starter N/A
    Ignition pink + ignition harness
    Second Ignition white + ignition harness
    Notes: To avoid the check engine light from coming on and possible damage to the automatic transmission, the second ignition in this vehicle MUST be powered when adding a remote start system.
    Third Ignition N/A
    Accessory orange + ignition harness
    Second Accessory brown + ignition harness
    Keysense lt. green - ignition harness
    Power Lock use 457G or 456G module
    Notes: If Directed module 457G or 456G is not available, refer to DirectFax document 1601.
    On base model trucks, the 457G or 456G is not necessary. Instead, the lock wire is lt. blue (-), pin B5, and the unlock wire is white (-), pin B10. They are in the lt. blue plug at the BCM.
    Power Unlock see power lock
    Lock Motor gray 5wi driver door module in door
    Unlock Motor tan 5wi driver door module in door
    Parking Lights+ brown + driver kick panel
    Parking Lights- gray/black - BCM, brown plug, pin B2
    Notes: The BCM (Body Control Module) is under the driver side dash. It has 6 plugs in it, the purple plug is on the back.
    Hazards white - steering column, 5 pin plug
    Turn Signal(L) dk. green + steering column, 5 pin plug
    Turn Signal(R) lt. green + steering column, 5 pin plug
    Reverse Light lt. green + BCM, black plug, pin F
    Notes: The BCM (Body Control Module) is under the driver side dash. It has 6 plugs in it, the purple plug is on the back.
    Door Trigger gray/blk (L), black/wht (R) - each door module in door
    Notes: On base model trucks the door trigger wires are in the lt. blue plug at the BCM, pins B4 and A5. On 4dr trucks the LR door trigger is lt. blue/black, pin A3, and the RR is lt. green/black, pin A2. They are in the purple plug at the BCM. Use all wires and diode isolate.
    The BCM (Body Control Module) is under the driver side dash. It has 6 plugs in it, the purple plug is on the back.
    Dome Supervision gray/black + BCM, black plug, pin E
    Notes: The BCM (Body Control Module) is under the driver side dash. It has 6 plugs in it, the purple plug is on the back.
    Trunk/Hatch Pin N/A
    Hood Pin N/A
    Trunk/Hatch Release N/A
    Power Sliding Door N/A
    Factory Alarm Arm arms with lock
    Factory Alarm Disarm lt. green - driver door module in door
    Disarm No Unlock see factory alarm disarm
    Tachometer white ac instrument cluster, pin A5 or PCM
    Notes: The PCM (Powertrain Control Module) is in the left front of the engine compartment to the left of the fan shroud. The tach wire is in the green plug, pin 10.
    For tach can also go to any of the ignition coils or injectors and use the wire that is NOT pink, black, or brown.
    Wait to start dk. blue - instrument cluster, pin A2 or PCM
    Notes: The PCM (Powertrain Control Module) is in the left front of the engine compartment to the left of the fan shroud. The wait to start wire is in the green plug, pin 36.
    Brake Wire white + brake pedal switch
    Parking Brake lt. blue - BCM, lt. blue plug, pin A7
    Notes: The BCM (Body Control Module) is under the driver side dash. It has 6 plugs in it, the purple plug is on the back.
    Horn Trigger black/yellow to black - steering column
    Memory Seat 1 red + driver door module in door
    Memory Seat 2 pink + driver door module in door
    Memory Seat 3 N/A +
    Interface Module: Category:
    Immobilizer Bypass Required:
    Yes Type:
    Passlock II
    Part #: 555LW
    Alternate Part1 #: 555T
    Notes: Not required if using the combo interface module.
    The Passlock II wire colors are yellow, black, and red/white (not used).
    Interface Module: Category:
    Door Lock Interface Required:
    Yes Type:
    Data Bus
    Part #: 456G
    Notes: Not required if using the combo interface module.
    Interface Module: Category:
    Combo Interface Required:
    Yes Type:
    Data Bus
    Part #: 457GW
    Notes:
    This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
    Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.

  3. #3
    rvrpig
    wanna do it for me?

  4. #4
    ROZ
    I'm sure Frank is more than capable.... CarToyz number is 928-680-0203

  5. #5
    rvrpig
    thanks iam gunna call him

Similar Threads

  1. Remote Solonoid and starter wire
    By thatguy in forum Gear Heads
    Replies: 2
    Last Post: 06-05-2007, 07:40 AM
  2. >>>HELP...REMOTE STARTER...<<<
    By rvrpig in forum Sandbar
    Replies: 14
    Last Post: 06-04-2005, 06:37 PM
  3. >>>HELP...REMOTE STARTER...<<<
    By rvrpig in forum Sandbar
    Replies: 8
    Last Post: 06-01-2005, 10:59 PM
  4. Remote Starter - How ???
    By Avenger 1975 in forum Gear Heads
    Replies: 8
    Last Post: 08-31-2004, 04:56 PM
  5. Starter Logg woodfire starter
    By MANIC MECHANIC in forum Boating, East
    Replies: 6
    Last Post: 12-21-2003, 07:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •