Rooster tail/Diverter ?

[mgar_red]

Maybe try putting a straight edge inside the nozzle/insert at points 360* to see if you find a rocker? Just brainstorming. :smile:

[bottom feeder]

Taylorman,
Are you running a droop?

[oldbuck40]

hey kevin dont worry about it at least you dont have what looks like to me is 3 tails coming out of mine???? i would love to know what is causing this problem also!!! it must be somthing to do with the 2 wedges i have in it now,,think about it b/4 the snoot, droop, or wedges its coming out of the pump straight! well i would think all the re routing of the water with the wedges or different angles with a droop or snoot would throw it all out of wack by the time you bend it again with the diverter thus causing it to split?
who knows? might be a good subject to bring up at somerville!!!

[HBjet]

PM Hustler... He had the same problem a while ago.
HBjet

[Taylorman]

No droop, i have a straight AT snoot. Maybe chet can help me
I will be talkin about it at Somerville if its not fixed by then.
Kevin

[Wicked Performance Boats]

Ok ,nobody has asked so I will. Are you sure that the pins that it pivots on are not sticking out or recessed? And what about the steering pivot too, or are the cradle bolts too long going into your bowl? Budlight

[Bryan Rose]

Does it look like this?http://www2.***boat.com/image_center...66DSC02441.JPG

[Taylorman]

Ok ,nobody has asked so I will. Are you sure that the pins that it pivots on are not sticking out or recessed? And what about the steering pivot too, or are the cradle bolts too long going into your bowl? Budlight
I need to check that tonight.
Bryan Rose,
No it sprays water off to the right also. Im gonna try to take a picture this weekend.

[jdf]

ours does it its the only way pebble''s can tell it's me on the water

[MudPumper]

Does it look anything like this???
http://www2.***boat.com/image_center...1653Roost1.JPG