Results 1 to 6 of 6

Thread: How many of you guys run metering blocks

  1. #1
    jimthetoolman
    How may of you guys run metering blocks? I am talking about the ones you use after the fuel pressure regulator? I have 2 carbs on my tunnelram and have the fuel regulator in between the two but I would like to use a metering block to install a gauge? Is this the way to go or am I just mildly retarded?
    Also if you do use one where is the best place to install it?

  2. #2
    Jet Hydro
    You talking bout one of these ? If so the best place is as close to the carbs as you can get so you know what the pressure is at the carbs.
    http://www2.***boat.com/image_center...030111-med.JPG

  3. #3
    jimthetoolman
    Yes thats what I am talking about.. nice job! it looks good.

  4. #4
    jimthetoolman
    Where do you have your regulator mounted?

  5. #5
    Jet Hydro
    Here again you want it as close to the carbs as you can get to keep the pressure up and the flow up. If you mount is far a way from your carbs your pressure and flow can very from time to time. As you see I used a few 90`s on my lines. Not all that good of an idea it`s best to use 45`s when you can.
    http://www2.***boat.com/image_center...030112-med.JPG

  6. #6
    steelcomp
    It's called a distribution block, and it's best to use straight fittings when you can.
    http://www2.***boat.com/image_center...ahner-fuel.jpg

Similar Threads

  1. Small Blocks vs Big Blocks in jets.......
    By 396_WAYS_TO_SPIT in forum Jet Boats
    Replies: 42
    Last Post: 01-20-2007, 03:54 PM
  2. adjust - a - jet metering blocks
    By GUGS102 in forum Gear Heads
    Replies: 6
    Last Post: 01-19-2007, 03:23 PM
  3. Metering Block
    By disco_charger in forum Gear Heads
    Replies: 3
    Last Post: 06-30-2003, 02:11 PM
  4. Metering blocks for 660's
    By West Coast Dave in forum Gear Heads
    Replies: 6
    Last Post: 12-08-2002, 06:40 PM
  5. carbshop metering block
    By FlatRat in forum Gear Heads
    Replies: 4
    Last Post: 08-06-2002, 10:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •