Forgive me for being an idiot! I just looked at the cooling system plumbing and found out the thermostat housing currently has two hose connections on it. My system is plumbed with a water inlet hose going to a tee on the floor, from there a hose goes to the front bottom hose connection on each of the exhaust manifolds. Then there two hoses running from the thermostat housing to each of the top front hose connection of the exhaust manifold. Lastly there are two hoses going from the front engine cover plate to a rear hose connection on each of the exhaust manifolds. Does this layout sound like a bypass system?
[This message has been edited by 77_Tahiti (edited July 11, 2001).]