THE SEATS IN MY BOAT DONT WANT TO STAY IN PLACE SO I WAS SCREWING THEM DOWN AND WHEN I WAS DONE I LOOKED UNDERNEITH THE BOAT I NOTICED THAT SOMEBODYELSE HAD DRILLED A FREAKEN WHOLE THROUGH THE BOTTOM --JUST THE POINT OF A SCREW BUT WHATS THE EASY FIX FOR THAT.. :cry: .PS HOW THICK AND IS JUST THE CENTER COVERED WITH WOOD.
mix a little fiberglass resin and use a small paint brush and apply. Or you could run a screw from the bottom with some silicone on it. When you are on plane the screws wll not even be in the water.
Posting Permissions
Reply With Quote