carb bodies

[carreraboat]

has anyone used those flowed bodies for a carb from pro form any luck you carb guys

[Hotcrusader76]

Yes...
They are nearly identical to the HP bodies minus a few differences. The Proforms come with drop-leg boosters already installed. The squirters do not have raised mounts such as the HP. The raised squirter mounts were built into the HP to prevent pull-over of fuel from the squirter (similiar to a siphoning affect). For an average performance motor that's not such an issue to be over-concerned with.
Other than that, they are nearly the same.
~Ty

[carreraboat]

for a naturaly asperiated motor do you use power vavles there has been talk of power gains with out there use

[Hotcrusader76]

Depends on the motors usage.
WOT with a 2X4 set-up, mostly likely not.
WOT single carb, maybe not but most likely just primary.
WOT Forced induction, most likely.
Sounds like a non-solid response, but it just depends on so many controversial factors.

[carreraboat]

crusader you are always a big help thanks for your reply

[carreraboat]

if i have a double pumper 800cfm would it be worth the 99.00 dollars for the bodie they say it will work on my carb