go to www.rpmcat.com click on intake manif & parts...there is a nice pic of sideways linkage that u can get an idea on how to make the bracket ur looking for
fastrat
Can any of you with a tunnel ram running sideways mounted carbs post a pic of the bracket your using to secure the cable at the motor? The bracket i was using is flexing under the preasure of opening the secondaries and i need to come up with something more solid.
thanks
go to www.rpmcat.com click on intake manif & parts...there is a nice pic of sideways linkage that u can get an idea on how to make the bracket ur looking for
fastrat
thanks.. I already have an enderle linkage.. it's the bracket that holds the cable housing at the intake so the cable wont flex when it's pushing on the linkage. I had suspected i wasn't getting full throttle and i checked yesterday and my secondaries are only opening about 2/3 before the bracket flexes up so i need something stronger.
thanks
http://www.hi-techperformance.com/images/DCP_9781cr.jpg
Email me if this is not what you want to see. I've got several different types of set ups. Duane