This is only kind of boat related, it applies to my motorhome that tows my boat. Here is my problem: It has a 79 Dodge 440. The passenger side valve cover will not seal come hell or high water. I have put several sets of gaskets on (both cork and rubber), tried several kinds of sealer including the blue felpro stuff and it still leaks. The bottom edge that mates to the cover is really thin. Within 1 hour of a new set of gaskets it starts leaking. It doesnÂ’t just drip, it LEAKS! The smoke comes up around the engine cover and you can barely see inside the camper. It looks like Cheech and Chong cruising PCH. I even bought a new pair of covers because the old ones were getting a little bent because they have been off so many times.
Can someone recommend something that dries like concrete and wontÂ’ burn away?