http://http://www2.***boat.com/image...1carrabean.jpg
One more shot at selling this project boat, 1960 biesmeyer caribean,recent paint, solid hull, toploader cassale with 1.17 gears, and reverse 1"shaft with 2blade mekens prop,cable steering, eng mounts and bellhousing for sbc, fixed cavitation plate,interior is there but needs to be redone.On a tandam 2 axel trailer with surge brakes. $900 for everything or may part out if I can sell the hull first.email rwbakk@netzero.com or pm for more info
http://http://www2.***boat.com/image...1carrabean.jpg
One more shot at selling this project boat, 1960 biesmeyer caribean,recent paint, solid hull, toploader cassale with 1.17 gears, and reverse 1"shaft with 2blade mekens prop,cable steering, eng mounts and bellhousing for sbc, fixed cavitation plate,interior is there but needs to be redone.On a tandam 2 axel trailer with surge brakes. $900 for everything or may part out if I can sell the hull first.email rwbakk@netzero.com or pm for more info
Where is the boat, and what shape is the trailer in????
Always thought that these would be cool restored. Put a Lincoln or Caddy engine in it, fully upholstered on a lowered trailer with some cool nostalgic wheels and your set. Someone really needs to give this boat a home.
The boat is near SLC Utah, The trailer is in good shape although the boat needs to be lowered on the trailer by about 10". The trailer has some surface rust on the fenders and bias ply tires with good tread
I want it, but the wife says I have too many boats already. She wants me to finish my current jet project first....
Just out of curiosity, what kind of shape is the hull in? Paint looks awesome, but what does it need besides the engine and interior?
The hull seams to solid I havent found any soft spots or rot , It will need a driveline, gauges,wiring and plumbing
ttt