Reply With QuoteDepends on the setup. Worst case is you have to put an extension on, but don't have to remove it. They range in size from 2" - 6"
http://www.cpperformance.com/images/125-WP14.JPG
i'm thinking of putting a blower deal in my flattie this winter . will i have to change my cam driven water pump ? or what
Depends on the setup. Worst case is you have to put an extension on, but don't have to remove it. They range in size from 2" - 6"
http://www.cpperformance.com/images/125-WP14.JPG
was just thinking that the belt might slap it
I dunno? Maybe somebody will post that had that problem or knows if that is a common problem. I didn't have a problem with it and I had real small pulleys. I ran an extension as the water lines interfered with the belt. I ran my belt fairly loose too.
yea that what i was thinking i will have to re plum it ...maybe someone can put a pic up???
I got some pics of my blown small block at home with some decent detail. I used a 4" extension and that was all that was really needed, besides some slightly longer waterlines to the pump. I will post up some pics when I get home in a bit.
Got one of these.. Adapter from a fuel cover to Magnaflow pump. Had to make the extension.
http://www.schoutenranch.com/miscboat/440/3pump.JPG
End result.
http://www.schoutenranch.com/miscboat/440/lines/4.JPG
http://www.hotboatpics.com/pics/data...2005_3-med.jpg if you can imagine your water pump in the place of my fuel pump. this is a 6 inch extension.hope this helps.
Here a picture of the way a boat I used to have was set up with no extension, they did it all with plumbing.
http://www2.***boat.com/image_center...08P9110006.JPG
what kind of pump do you have? And if it's the neovane does it have the "T" top or just to 2 ports?
Posting Permissions