Questions about a Mallory distributor (460 Ford)

[rerfert]

First a little background...I bought a jet boat with a 460 Ford that had the top end of the motor stole off it (Intake, Carb, Distributor, Wires, Coil, Valve covers, Air cleaner)
http://www.yumaduners.com/albums/alb...009f.sized.jpg
I picked up this Mallory distributor thinking it would wire up easy in place of a stock point distributor.
It looks like a dura-spark style and I have searched (some) for wiring a 2 wire Mallory distributor and have not found much information.
My main question as well as a wiring diagram (somewhere)would be can I just wire it to a coil OR do I need a control box and what ever else??
Thanks in advance, Rick

[FASTRAT]

Hang in there...the Ford guys will be along shortly to answer all ur ??? & give u all the help u need
Ron (fastrat)

[sanger rat]

I think they all went to the races. I'm stuck here in the snow. :cry:

[rerfert]

Hang in there...the Ford guys will be along shortly to answer all ur ??? & give u all the help u need
Ron (fastrat)
Thanks, the water is getting cold though
Seriously I have time,the second job last summer took my time away from the boat for the season...I will put the boat in the water when it does finally come together and run on the garden hose(cold water or not)

[Rexone]

If you know the part number you may be able to figure it out here... http://www.malloryperformance.com/In...aspx?BrandID=6

[rerfert]

If you know the part number you may be able to figure it out here... http://www.malloryperformance.com/In...aspx?BrandID=6
I don't find a part number on the distributor BUT that is an Awesome site Thanks...Figure 18 looks like what I need.

[RiverRacer]

I don't find a part number on the distributor BUT that is an Awesome site Thanks...Figure 18 looks like what I need.
Make sure you change the Rotor on that at least.

[rerfert]

Make sure you change the Rotor on that at least.
I had planned on doing a mild tune up on the motor after the first test run.
Is that the actual design of the Mallory rotor OR did someone modify it?
I had my eye on a hyfire IV box that I missed :cry: on Ebay today...my slow computer and me getting my bid in too late...

[Rexone]

That's the rotor's design. I might have some Hyfires (new) laying around. Not sure weather III's or IV's though. I will check and see if I can find them.