What I've done is to put one or two of the bowl bolts about 1/2 way in and pry against the head of the bolt to bust it loose. You can get a pry bar between the cleanout housing and the bolt.
Just wanted to know if anyone could tell me how to separate JC bowl from the rest of the pump. Im this far, the 8 bolts inside the hull are removed, all cables removed, transom plate removed, but it wont budge!
What I've done is to put one or two of the bowl bolts about 1/2 way in and pry against the head of the bolt to bust it loose. You can get a pry bar between the cleanout housing and the bolt.
Wow, it worked! Thanks