We are seeing about 10 feet tall with minimal speed loss. When its knocking down airplanes you can feel the 10mph drop and see the speed go down on the gps......
How many degrees does a good diverter travel up? I mean good as in big spray and good distance without too much loss of speed. Thanks guys
We are seeing about 10 feet tall with minimal speed loss. When its knocking down airplanes you can feel the 10mph drop and see the speed go down on the gps......
Im messing around with y panther jet and am not sure how many degrees the nozzle should tilt up from the drive housing, i want to go high but i also don;t want to waste my time and make it go straigt up or something. Right now im thinking somewhere around 30 degrees Does anybody know how mch thiers travels?
I don't know how many degree's I'm getting in up travel, but here is a pic with my Jet-o-vater all the way up...
http://www.hotboatpics.com/pics/data...3__Medium_.jpg
I would guess no more than about 5* up from centerline.
this pic was taken with my diverter all the way up and 6 deg of wedge........
http://www.***boat.com/image_center/...70DSCF0020.JPG
No droop 7* wedge 3/4 up.
http://www.***boat.com/image_center/data/520/23112.jpg
No wedge or droop, just a manual Place diverter 1 click from the top.
http://www.***boat.com/image_center/...12Dscn1633.jpg
well since you guys are so good at posting pics, could you post some of your jetdrive out of the water int he driveway opr soemthing w/the diverter all the way up ? Thanks fellas
http://i29.photobucket.com/albums/c2...Picture004.jpg
I dont know if thats all the way up , but it might be.
NOT THE BEST PIC BUT ITS ALL THE WAY UP , I THINK
http://i29.photobucket.com/albums/c2...et/Ad_22_3.jpg