Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: GM * QT Truck Oil Pan#>>>

  1. #1
    HammerDown
    Looking for any info for a 8 Qt Truck oil pan part # for a mark4 block...thanks.
    GM parts guy was useless.

  2. #2
    jstwkd
    Gm makes an 8 qt pan for the gen 6. But I was told no for the gen 4. Here is the 6 qt LS6 pan # 14103141 from GM. hope this helps. Maybe someone makes an after market pan.I did not check the after market.

  3. #3
    wsm9808
    We did a gen 4 a couple of weeks ago, and the customer brought a pan he bought at the dealer for us to install. It looked like 7 to 8 quart pan and had a baffle and trap door in the pan to keep the oil in the sump during decelleration and it came with a small windage tray that bolts to the ends of studded main cap bolts. Sells over the counter for less that 100.00 bucks.
    I'll try and remember to get the part # tomorrow at work.

  4. #4
    HammerDown
    Thanks...that sounds like the 8 qt. I'm refering to 8" deep?...but without a part# the GM Parts guy is lost.

  5. #5
    wsm9808
    Part # on pan is 14091356, I looked up that number in an older Scoggins/Dicky catalog I had laying around and it showed it to be the old LS7 pan. Try gmparts.com, it might have better info.
    I had the same pan on my jet boat, I think it was 8 1/4 inch deep, but its been awhile
    [ March 18, 2003, 05:25 PM: Message edited by: wsm9808 ]

  6. #6
    HammerDown
    Thank you sir...I'll look into that number...

  7. #7
    wideopen545
    hey hammer ive got a 8 qt truck pan here but it dose not have the baffels in it, the lowes motor speedway swap meet in april 3, 4 ,5 ,6 they will have it their or you can weld baffels in the one i have if it will help ya tim

  8. #8
    HammerDown
    GM Parts guy said...yep its a pan...couldnt give me any details on it...nothing at all .
    Tim thanks for the offer...but I'm gona sniff around and see if I can find a new one.
    The one I have has a bolt on windage plate and a trap door in it but its thin in several spots...Last resort will be the Milodon # 31557 or 31195. But I like the stepped auto type of pan so as to sneek my bilge pump infront of it.

  9. #9

  10. #10
    HammerDown
    The above is a 5 quart...I'm looking for the GM 8 qt. Thanks anyhow.

Page 1 of 2 12 LastLast

Similar Threads

  1. Hey Jay, dad was right about the truck.....
    By Kachina26 in forum Sandbar
    Replies: 1
    Last Post: 06-20-2007, 01:11 PM
  2. Trade Diesel truck for gas truck!!
    By wright27 in forum Parts 4 Sale
    Replies: 31
    Last Post: 04-07-2007, 07:16 PM
  3. Looking for a new truck
    By Diablo54 in forum Sandbar
    Replies: 3
    Last Post: 08-17-2006, 06:40 AM
  4. New truck
    By phebus in forum Sandbar
    Replies: 27
    Last Post: 11-18-2004, 04:15 PM
  5. Buying a new Truck: and the truck is?
    By bear down in forum Sandbar
    Replies: 35
    Last Post: 03-17-2004, 09:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •