Page 1 of 4 1234 LastLast
Results 1 to 10 of 33

Thread: 427 blower motor froze up

  1. #1
    atxwrangler
    this motor was in a 1990 cheyenne i bought,however,i have a blown ford 466 to put in it and don't really need this motor.all i know about it is it was supposedly running when the guy parked it.he let it set outside for 3 years uncovered.it is supposed to be an 871,it is a bds blower on a weiand intake.the 427 says high performance on it, and the heads are 6272990's.i want to keep the carbs,mounts, guard,and hoses,.i wouldn't even know what to ask for it,so please give me some feedback.as it was sitting the scoop was covered with the cover in the picture and was tight.there is no water in the oil.my phone number is 361-782-1241,thanx,marty http://www.***boat.com/image_center/...86DSC_5616.jpg

  2. #2
    lucky
    be worth more running I would pull the plugs and run some penitrating oil down the cylingers - Rings might just be froze - make sure there is no water in the cylingers - might be fun to get drunk and work on a chevy - :crossx: cause its a rarity that you have to work on one -- heheheheh

  3. #3
    76ANTHONY
    find out what ya want for it and let me know. i need and engine for a v-drive...

  4. #4
    atxwrangler
    I Would Like To Get Around $4000 For It,is This Reasonable?there Is A Set Of 990 Heads On Ebay Right Now For 1200.00 .

  5. #5
    74_schiada_flat
    I Would Like To Get Around $4000 For It,is This Reasonable?there Is A Set Of 990 Heads On Ebay Right Now For 1200.00 .
    6272990....70-up...rect...OPEN...454 service replacement, used on some MKIV crate engines, 118cc chamber
    they are service replacement heads probobly get them cheaper from GM
    are you sure they are not 290 on ebay for $1200?

  6. #6
    DansBlown73Nordic
    If this helps...I bought a Blown 454 complete and running from a Marina in Florida for $3000 with a set of 990 heads. 4 bolt block.....$4000?????? :crossx:

  7. #7
    74_schiada_flat
    If this helps...I bought a Blown 454 complete and running from a Marina in Florida for $3000 with a set of 990 heads. 4 bolt block.....$4000?????? :crossx:
    yeah i must say that $4000 for what you have is a little steep!
    it would most likely cost $4000 to get it back together again.
    $2500 is my offer and i would have to seriously think about it.

  8. #8
    Senior Member
    Join Date
    Feb 2009
    Posts
    1,820
    if he's lucky he will find someone to buy it at all. sounds like it's worth maybe $1000.00

  9. #9
    76ANTHONY
    if he's lucky he will find someone to buy it at all. sounds like it's worth maybe $1000.00
    dam i felt bad thinking thats what i'd give for it....

  10. #10
    atxwrangler
    That's Why I Wanted To Ask Everyones Opinion.i Have About 12 Grand In My Blown 466 Ford,i Might As Well Just Keep It And Rebuild It If I Need Another Motor.thanx For Everyone's Opinions!

Page 1 of 4 1234 LastLast

Similar Threads

  1. Replies: 51
    Last Post: 05-21-2007, 09:24 PM
  2. 496 Blower Motor
    By LynnsJet in forum Boating, East
    Replies: 7
    Last Post: 09-01-2006, 01:51 PM
  3. Hell Froze Over!
    By Midlife Advantage in forum Sandbar
    Replies: 1
    Last Post: 03-13-2006, 07:47 PM
  4. blower motor running w/out the blower
    By Essex29 in forum Gear Heads
    Replies: 5
    Last Post: 04-13-2005, 07:11 PM
  5. My Blower Motor......
    By DansBlown73Nordic in forum Boating, East
    Replies: 5
    Last Post: 04-20-2004, 06:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •