Reply With QuoteDo you already have thru transom exhaust or is it the y-tube through the hub?
I s there an exhast system to upgrade a 1997 Cole Nighthawk 22' 502 Magnum MPI? Can hit about 70mph now but I want it to breath a little better.
Do you already have thru transom exhaust or is it the y-tube through the hub?
I'll have to check. It's all factory stock.
Do you have exhaust tips coming out the back of the transom under the swim step?
No. I don't think there's any tips. Is there headers made for these?
Merc recommends thru hull on any mag motor. You have thru hull.
Merc recommends thru hull on any mag motor. You have thru hull.
Thru transom was an OPTION at least on Coile's.
No. I don't think there's any tips. Is there headers made for these?
Yes, and since you are starting from scratch, I would recommend the CMI E-tops and they will make the down tubes to match where you cut the tips in. These are all stainless steel and will last forever. Lightenings and other steel tube will not last as long no matter what they tell you. I have been through a couple sets in different boats, they start to rust. I will only buy SS from now on.
There's a set of stainless on Ebay. Would these work? are they just cast iron manifolds and SS tubes?
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Thru transom was an OPTION at least on Coile's.
Really? On a Cole :hammerhea
Posting Permissions