Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: What Kind Of #'s Should I See

  1. #1
    ERV JR
    I Have A 19 Foot Charger Cruiser,with A 8.5 -1 454,with O49 Heads
    Performer Rpm Cam And Intake, Pump Is A Berk E With An A Impeller
    With 2 Seasons On The Pump. I Went Throught The Motor For This Season After I Bought The Boat Found 2 Broken Valves, A Flat Cam
    And 2 Bent Push Rods, Good Thing I Got It Really Cheap. I Had The Intake ,cam,already And Was In A Hurry So I Used Them. I Found Out The Vac Sec Carb Wasnt Opening The Sec,and Boat Gps Speed Was 49.8 On The Primarys,changed The Spring Last Night And Am Gonna Try It This Weekend At Lost Lake. So I Ask U Gusy What I Probally
    Can Expect To See,and Does The Cam Have Too Much Duration For My
    Comp Ratio,and What Mods Will Help Speed,loader,droop, Or What ?

  2. #2
    mnjettr
    I Have A 19 Foot Charger Cruiser,with A 8.5 -1 454,with O49 Heads
    Performer Rpm Cam And Intake, Pump Is A Berk E With An A Impeller
    With 2 Seasons On The Pump. I Went Throught The Motor For This Season After I Bought The Boat Found 2 Broken Valves, A Flat Cam
    And 2 Bent Push Rods, Good Thing I Got It Really Cheap. I Had The Intake ,cam,already And Was In A Hurry So I Used Them. I Found Out The Vac Sec Carb Wasnt Opening The Sec,and Boat Gps Speed Was 49.8 On The Primarys,changed The Spring Last Night And Am Gonna Try It This Weekend At Lost Lake. So I Ask U Gusy What I Probally
    Can Expect To See,and Does The Cam Have Too Much Duration For My
    Comp Ratio,and What Mods Will Help Speed,loader,droop, Or What ?
    I have a 78 Charger 19ft. with a 454 and a dominator pump/droop. I see 63mph at 4200 rpm.

  3. #3
    ERV JR
    With The Primarys Only Open I See 4200 Rpm @ 49.8, I Used A Zip Tie To Make The Secondaries Open And Out The Hole The Boat Jumped Up
    On Plane And Rpms @ 5200 But Didnt Stay In Itcause The Zip Tie Made Th Linkage Bind. What A Dumb A$$, The Stupid Ideas I Have To Go Faster .

  4. #4
    boater012
    You should see lots of numbers!! :crossx: :220v:

  5. #5
    blender over
    I Have A 19 Foot Charger Cruiser,with A 8.5 -1 454,with O49 Heads
    Performer Rpm Cam And Intake, Pump Is A Berk E With An A Impeller
    With 2 Seasons On The Pump. I Went Throught The Motor For This Season After I Bought The Boat Found 2 Broken Valves, A Flat Cam
    And 2 Bent Push Rods, Good Thing I Got It Really Cheap. I Had The Intake ,cam,already And Was In A Hurry So I Used Them. I Found Out The Vac Sec Carb Wasnt Opening The Sec,and Boat Gps Speed Was 49.8 On The Primarys,changed The Spring Last Night And Am Gonna Try It This Weekend At Lost Lake. So I Ask U Gusy What I Probally
    Can Expect To See,and Does The Cam Have Too Much Duration For My
    Comp Ratio,and What Mods Will Help Speed,loader,droop, Or What ?
    36mph down river
    108mph falling out of an airplane :rollside:

  6. #6
    ERV JR
    Thanks For All The Great Input!!! The Help Has Been Great,i Think I Will Go And Drop My Boat Out Of A Plane!! Maybe U Two Wrer Droped On Ure Heads , Jk , But I Really Am Lookin For Advice On Cam Choice And Mods

  7. #7
    Devilman
    36mph down river
    108mph falling out of an airplane :rollside:
    LMAO friggin Blender....

  8. #8
    blender over
    LMAO friggin Blender....

    Just a quick punch to the jets, nothing personal

  9. #9
    Devilman

    Just a quick punch to the jets, nothing personal
    I hear ya. Shit's still funny though.

  10. #10
    Pro Max
    Motor and Pump isnt everything its all about the hull and setup. How wet is the boat ? What is your pump pressure ? Is the motor at the correct RPM.

Page 1 of 2 12 LastLast

Similar Threads

  1. what kind of mph.....................
    By bead in forum Jet Boats
    Replies: 18
    Last Post: 02-28-2007, 09:26 PM
  2. What kind
    By QuickCheetah in forum Jet Boats
    Replies: 12
    Last Post: 06-11-2006, 08:44 PM
  3. What kind of oil
    By sifocalpoint in forum V-Drives
    Replies: 21
    Last Post: 08-29-2005, 06:19 PM
  4. One of a kind
    By shootingstar72683 in forum Jet Boats
    Replies: 2
    Last Post: 08-15-2005, 03:14 AM
  5. What kind of oil??
    By OutCole'd in forum Gear Heads
    Replies: 15
    Last Post: 04-21-2004, 04:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •