I am building a new sbc 383 for this summer, it is going in a 1989 18' Powerplay.
I would like to see your guy's combo's and any idea's you have... here is mine so far..
94' 4 bolt block
eagle 4130 forged 3.75" stroker crank
eagle H beam, 3-D ESP rods...
SRP forged pistons. 9.8:1(has a dish of 16cc)
Hastings Moly rings
vortec cast iron heads, screw in 7/16 studs and guideplates.
Crane full roller valvetrain
Crane roller cam.. 222/230 dur. .509/.528 lift 112 LSA.. gonna use 1.6 rockers so lift will be .543/.563 lift
matching springs, retainers and locks.
Edelbrock RPM air gap intake
750 holley, vac sec and elc.choke
IMCO thumper power exhaust
I am hopeing for around 380 hp..
any advice?
Travis