Do you have a return line going back to the tank?
I conitually have to bleed the fuel lines due to vapor lock. I am running an electric fuel pump and a Holley Mechanical pump regulated to 6-7 psi. The fuel is drawn from the tanks evenly. Does anyone know if there are tanks that are vented or recommend any vents to install on the exiting tanks?
Do you have a return line going back to the tank?
I boat i bought that has filler caps with vents built into the caps
You have to have a vent, or it will vapor lock. Got to replace fuel with something, or it build a vacuum in the tank. I would have vents put on the tanks. You could have a welder install bungs.
Dan
If there are no vents currently, and I would be surprised if they were not in place at the original build. I would tee off a vent from the filler hose.
You have to have a vent, or it will vapor lock. Got to replace fuel with something, or it build a vacuum in the tank. I would have vents put on the tanks. You could have a welder install bungs.
Dan
Fluids under a pressure less than atmophere will boil at at a lower temp,including blood.
Vent off the front of the tank, loop the vent hose a couple of times, and vent out the side of the hull. Also reccomend a shutoff valve at the tank. I have lost fuel going down steep grades while towing, the shutoff valve cured it.
put an electric fuel switch in it. and draw from one tank at a time.
yeah thats really good idea, that way you can pull each tank into a vacuum one at a time
That's going to hurt...
Steve