Gears

[Ragemaster]

Does anyone have a set of 15% gears for an old top loader,10 degree Casale? Or know where to look?

[Sangster]

Click Here Ask for Tom Bentley or Get a hold of SuperDave013....
[ October 23, 2002, 07:26 PM: Message edited by: Sangster ]

[V-Drive Tom]

Ragemaster, Your toploader is 12 degrees. The common gear ratios are 1.09,1.14,1.17. Make sure you know if you have 10 spline shafts,or shafts with one keyway.(where the gear goes on the shaft.) A good source for used v-drive parts,(besides me)is Steve McElroy 714-903-1553. Call me if you need any help. TOM..

[Ragemaster]

Tom, I have some extra gears that came with the boat,the large gear has 1.21 and 1.17 on it, and the smaller gear has 1.17 on it. I have a 350 hp small chev in the 18 ft Sanger flat, will those gears work? Im told I need 15% od for this boat. The shafts are a key way not splined btw.

[V-Drive Tom]

Ragemaster, The 1.17 will work OK,but not great. With your small block engine you will be better off if you go with a lower ratio. TOM..