reverse spam/need complete boat engine

[sscoupes]

looking for a 496 or 502 magnum complete.fresh water.low hours.must be efi.

[Flying Sterling]

I need a NON (NOT) efi just jumping in not hijacking . Kinda like teaming up.

[Kilrtoy]

I know someone with a viper 625, just a little more than you are looking for

[ZZ502]

I have a carb ZZ502/502 w/ about 25hrs. The heads have been massaged, The short block was pulled apart when new and all clearances checked and reassembled, roller rockers, Dart SP manifold, standard stock 6qt. pan, BIGS 950hp DP holley carb, Comp roller Cam (.625 lift). Doesn't have ignition system. The motor was dyno'd with the stock ZZ502 cam (.544 lift),chev. dp manifold and 850 VC holley and made 545hp and 605tq. I did not dyno after changing to new cam, manifold and carb but it should be close to 600hp. $7,200. I also have a milidon 10 qt. pan (7" high for jet boat) for $250.
before you ask the question-it was in a '85 20' Miller jet that I'm selling with a stock motor. I also purchased a deck boat with a small block chevy that I'm building 454 small block for(less weight). You can contact me by replying to this thread or email wblies@sundt.com.