Metering Block

[disco_charger]

Can I use the metering block from my 830 Holley on my HP 950? Anyone know?

[disco_charger]

Come on Ty, you've got to know!

[058]

A couple of things that has to be the same is the idle feed restriction and the PVCR if you run a power valve. If those two sets of holes match up then it will work.

[Hotcrusader76]

Thanks "PV" King ...
He's right. I would just block the powervalve and check the idle orifice size. The orifice on an 830 metering block could be as large as .034" and as small as 0.032" which would work either way with a 950 or even a 750. It just means you'll be a little richer.
~Ty