Reply With QuotePretty sure it cures the problem. It can be set to only release the header water at 1500 or 2000 rpms per the tach.
Does a Banderlog valve totally cure water reversion back into the exhaust port? Or, would it still happen with a Banderlog installed and a big enough cam with a lot of overlap? Just curious.
Jay
Pretty sure it cures the problem. It can be set to only release the header water at 1500 or 2000 rpms per the tach.
I am using one with a 715 lift cam. No problem.
No problems here either :boxed:
Sleek
I am using one with a 715 lift cam. No problem.
Me Too! Positve header water control. There's nothing better than that!
Exactly the info I was looking for thanks fellas!
Jay
Posting Permissions