Where to get a transom splash gaurd?

[smoked]

I have a 1980 sleekcraft tunnel jet and need a transom splash gaurd(I geuss that is what you would call it). Any help would be great, thanks.

[Liberator TJ1984]

I made mine out of a sheet of 3/16" smoked lexan, plexiglass will break..
myself and a few others went in on a 4 x 8 sheet , it was about $ 75 and will make 4 splashgaurds approx.
there are a few here on the boards that will make you one for a few hundred bucks

[Cole1313]

I have a 1980 sleekcraft tunnel jet and need a transom splash gaurd(I geuss that is what you would call it). Any help would be great, thanks.
Where are you located.

[BUSBY]

Try these guys ...
Wayne Earl Mfg Inc.
520 S Jefferson St.
Placentia Ca 92870
Phone: 714/577-0632
Fax: 714/577-0635
E-mail: wemfg@aol.com
http://www.wayneearl.com/

[smoked]

Where Are You?
Oops. My Bad. Northern California, Sacto area.

[anger management]

try TAP plastics

[sleekcrafter]

Try these guys ...
Wayne Earl Mfg Inc.
520 S Jefferson St.
Placentia Ca 92870
Phone: 714/577-0632
Fax: 714/577-0635
E-mail: wemfg@aol.com
http://www.wayneearl.com/
$350-$450 range for a splash guard
Sleek

[jimthetoolman]

Check your pm's

[YeLLowBoaT]

I would go to tap... They have very good prices. That is if your looking to go plastic, If you want it in AL I know some good fab guys.

[BigBlockBaja]

I made mine out of a sheet of 3/16" smoked lexan, plexiglass will break..
myself and a few others went in on a 4 x 8 sheet , it was about $ 75 and will make 4 splashgaurds approx.
there are a few here on the boards that will make you one for a few hundred bucks
Can someone give some pointers on making one? Took on way to much water last summer...
How does one keep it level all around the hull with the different contours?