Page 1 of 4 1234 LastLast
Results 1 to 10 of 31

Thread: Anyone towing with the Vortec 6.0?

  1. #1
    2Driver
    Anyone towing with the Vortec 6.0 (345 Hp 385 Ft Lbs torque). If so what do you tow and your opinions?
    I need to step up just a bit from this 5.3 with the 3:73's and wonder if that would do it towing 6K

  2. #2
    DansBlown73Nordic
    I just bought a 00 3/4 with the 6.0 and 373s. So far I love it. I think it has a ton of BALLS.. My first tank of fuel was almost 15 mpg.

  3. #3
    DansBlown73Nordic
    I forgot to mention I have towed NOTHING.....

  4. #4
    BajaMike
    I just got an '02 Chev 2500 hd crew cab with 6.0 and 4.10 rear end, i don't even hardly feel my boat, but it's a small boat, 20' Baja Outlaw, about 5,000 lbs fully loaded with fuel.
    I would get a 4.10 rear end for anything heavier then that.

  5. #5
    GHOSTRYDER71
    I've had three crew cab 6.0 they are nice for towing.I had 4.10 gears.What are you looking at buying? I towed about 6800 lbs got around 9.6 to 12 mpg
    I had 285/75/16 tires as well ( that hurt on mileage and power).I was very happy with the way they towed.Now I have stepped up to a d-max.

  6. #6
    2Driver
    Thanks, I just have a large 21' that weighs about 5800 loaded.
    I was hoping for the 6.0 engine in the new avalanche 1/2 ton but no luck. Looks now like I am going with the new 1/2 ton crew cab with the 6.0 Vortec Max option and the 4:10's. Hopefully the degraded ride ( compared to the avalanche) will be made up in the towing capabilities.

  7. #7
    riverracerx
    I have an Escalade with the 6.0L @ 345HP. I tow a 28' Nordic, but only in town in Havasu. I used to have a F150 w/ 260 HP and it is unbelieveable what the difference is. Off the line the 6.0L is MUCH stronger. And with the shorter wheelbase I can stick that trailer in any tight spot!
    Oh, and it is FOR SALE!!!! (http://www2.***boat.com/forums/showthread.php?t=103169) if anyone is interested!!

  8. #8
    BajaMike
    Thanks, I just have a large 21' that weighs about 5800 loaded.
    I was hoping for the 6.0 engine in the new avalanche 1/2 ton but no luck. Looks now like I am going with the new 1/2 ton crew cab with the 6.0 Vortec Max option and the 4:10's. Hopefully the degraded ride ( compared to the avalanche) will be made up in the towing capabilities.
    I would get the 1500 hd crew cab ....nice!

  9. #9
    Cole Trickle
    You will be fine towing 6K with the CC 1500 (Vortech Max package)
    Your only issue is the gas mileage will be pretty crappy pulling hills.(I had a 03 1500HD with the 6.0L and never got better than 12MPG on the freeway)
    I have an 05 cc 1500 with the 5.3 and 3:73 gears and it tows my 28' Sleek fine around town.(We only tow it home from Parker a couple times a year)
    with the 6.0LHO motor you will have tons of power but the weight of the vehicle and tranny will be your downfall.
    If your pulling heavy grades you might consider a D-Max and the Allison.

  10. #10
    RAZORSHARP
    Anyone towing with the Vortec 6.0 (345 Hp 385 Ft Lbs torque). If so what do you tow and your opinions?
    I need to step up just a bit from this 5.3 with the 3:73's and wonder if that would do it towing 6K
    I used to have a 2500 HD with a 6.0 and towed a 23' boat. Towed great. Now i have a 5.3 burb with 4.10 rearend and catback exhaust. I tow a 27' about 5,000 lb. bone dry. I get 11-12 mpg and slow down on the same grades the 2500 did. the 3.73's to 4.10's make a difference, runs a higher rpm at speed.

Page 1 of 4 1234 LastLast

Similar Threads

  1. Cam specs for vortec EFI 325?
    By curtis73 in forum Gear Heads
    Replies: 3
    Last Post: 11-09-2006, 10:47 AM
  2. Sbc Vortec Heads
    By IMPATIENT 1 in forum Parts 4 Sale
    Replies: 4
    Last Post: 08-19-2006, 02:57 PM
  3. Replies: 23
    Last Post: 06-12-2006, 03:38 PM
  4. 502 Vortec hp
    By tbanzer in forum Gear Heads
    Replies: 0
    Last Post: 05-30-2006, 02:13 PM
  5. Gm Vortec 496 Mag Ho
    By Essex29 in forum Sandbar
    Replies: 4
    Last Post: 02-12-2004, 04:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •