1 set of Dart Pro1 345 heads, port work by Wes King, new valve guides and seats by AJPE, Manley Stainless Steel Severe Duty Valves (2.30/1.88), fresh valve job by Alan Johnson.
They had small repair. but I spent over $1600 to Johnson to repair/install new seats/pressure test/flow/perform valve job/install new guides ...
Had the deck surface checked by Bob McKray & secondary flow performed to verify proper repair.
New castings cost about $1200k bare, port work $1200, severe duty stainless valves $500, AJ valve job, etc. etc. etc.
Ready for someone who is building a motor, all you need is your cam specs to buy your springs, retainers & keepers, etc ... and you're ready to go.
$2100 out the door and they're yours.
http://www.***boat.com/image_center/..._20_07_013.jpg
http://www.***boat.com/image_center/..._20_07_012.jpg
http://www.***boat.com/image_center/..._20_07_014.jpg