Does anyone have a v drive side flange, for a driveline cover?
Are there any creative ways to connect the tube to the v drive, 5 9/16 " , inner diameter.
We are on the last steps for completion of this Hondo.
If you are a showoff you can have each side threaded and screw the driveline guard on then set screw it to lock it, if your alignment is close enough, but we usually just drill and tap the flange with 2 3/8" bolts about 30deg apart and saftey wire both of them together. It's pretty sano and easy to work on.
Not that showy, ha, but I need the flange. Screw on huh
Mr. Vdriver can get one for ya, after all he is a Casale, they can't cost very much. just some turned and drilled alluminum.
Mr. Vdriver can get one for ya, after all he is a Casale, they can't cost very much. just some turned and drilled alluminum.
Where is your "location, location, location." outer space, or have you been "missing" for awhile....."Casale" and "cheap" are mutually exclusive words......MP
Hahahah, didn't your old man ever tell ya, "you get what you pay for"
He probabably said it around the same time he told ya "location, location, location"
i'm just local scum from Boulder City/Lake Mead
I have a used one. If your interested I will get it from my storage building and take a picture. Dan
Fantastic,
My case(12 degree casale) has six bolts for mount, some have 5. Need to remeasure but it should be @5 9/16" inner diameter of tube. I know the guard came off a 72-3 Sanger, thanks for checking for me and how mucha do ya want for it?
Thanks daddy b
Hondos rule, Nordics are very nice though.
Still looking for a flange, before I have one made.
Posting Permissions
Reply With Quote