Ok, here we go... These are off my 80 Sanger Mini Day Cruiser... I am pretty sure that I will need both... the fin is really bad and the rudder is pitted pretty good too. I would like to repair and reinstall, but I have precious cargo that I carry in the boat, so I am thinking new would be better. The rudder has a shaft that is about 15/16" and the leading edge measures 11 3/4" while the trailing edge is about 8 1/2". The shaft is about 12" in length. On the trailing edge there is "R-201" stamped on the edge.
The fin, as you can see does not mount "flat" it has a slight angle to it as it mounts from the bottom. The overall length is 13 1/2" by approx 3". the fin itself is about 5 1/2" at the tip and about 11" in length. Is has "cruiser" stamped on it as well.
Phew...no that I spouted all that out... Can anyone point me in the right direction? I was also wondering if the Schiada style fin would work? I have seen it is a post somewhere on here.
Any and all help is GREATLY appreciated!
Thanks,
Bill
http://i49.photobucket.com/albums/f2...rt/rudder3.jpg
http://i49.photobucket.com/albums/f2...rt/rudder2.jpg
http://i49.photobucket.com/albums/f2...rt/rudder1.jpg
http://i49.photobucket.com/albums/f2...rhart/fin3.jpg
http://i49.photobucket.com/albums/f2...rhart/fin2.jpg
http://i49.photobucket.com/albums/f2...rhart/fin1.jpg