Results 1 to 9 of 9

Thread: Casting Numbers

  1. #1
    460 jus getn it
    I have a set of heads that i picked up. I think they are 84-87 460 ford . the casting number on the side says E7TE. Does anyone know what type of heads these are........ Thanks 460

  2. #2
    058
    From the casting no. they are 87 truck heads and if I remember correctly early std. 460 intake manifolds will not work due to port mismatch.

  3. #3
    Pantera24-650hp
    See Mortec website, they have all the casting numbers listed.

  4. #4
    460 jus getn it
    058, are these heads worth getting rebuilt and running in my motor? And what type of intake will best fit these heads....... jawdrop

  5. #5
    Blown 472
    You should find some dove's or d3ve's depending on what comp you want to run. Also check out reincarnation-automotive.com some info on heads and stuff. wink

  6. #6
    460 jus getn it
    blown472, these heads are 92cc. im looking to run 9.5-1 comp. these heads are off of a 88 ford. my problem is that an 88 460 was fuel injected. will these heads accept a 460 intake manifold? eek!

  7. #7
    Blown 472
    I am not sure, I think you might have trouble on the exhaust side also, go check out that site, there is some info on those heads.

  8. #8
    058
    460 jus getn it:
    058, are these heads worth getting rebuilt and running in my motor? And what type of intake will best fit these heads....... jawdrop As I understand it the manifold will physically fit but the intake ports will be mis-matched. Try to find some C8 C9 or D0VE-C heads if you want a C/R on the high side or a set of D3VE-A2A heads for a lower C/R, Do not bother with the D2 heads as these are usually open chamber type and are prone to detonation.

  9. #9
    460 jus getn it
    So basically i have two new boat anchors....... jawdrop

Similar Threads

  1. Casting numbers again...
    By Devilman in forum Gear Heads
    Replies: 4
    Last Post: 08-12-2005, 05:37 PM
  2. casting numbers help
    By mike37 in forum Gear Heads
    Replies: 2
    Last Post: 08-09-2005, 05:07 AM
  3. Identify these casting numbers please!!!
    By 396_WAYS_TO_SPIT in forum Gear Heads
    Replies: 7
    Last Post: 03-19-2004, 09:12 AM
  4. casting numbers
    By 460 jus getn it in forum Gear Heads
    Replies: 13
    Last Post: 07-22-2003, 10:17 PM
  5. Where to look for casting numbers????
    By kevnmcd in forum Gear Heads
    Replies: 4
    Last Post: 11-06-2001, 10:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •