Turbo cam help

[fc-pilot]

Who is the best cam manufacturer as far as turbo cams go. We are looking at putting a hydraulic roller in this time around and would like some ideas.
Paul

[texas-19]

Call this guy,he knows turbo motors
http://www.camshaftinnovations.com/

[Marty Gras]

"No refunds No exchanges!"

[Sleeper CP]

Try Dan Crower at 866-361-2267. Or at www.CrowerPower.com ask Dan if he'll do a custom cam for you. Just tell him what you have and what you want it to do. If I were going to get a catalog cam I would check CompCams or Crane and Isky. You can't go wrong with either one they all have good catalog parts.
Sleeper CP

[fc-pilot]

I may give him a call Monday. I am not looking to stick a catalog cam in this thing. I don't want to have to pull this thing back apart because it was not quite what I was hoping for. Thanks a ton guys.
Paul

[tbanzer]

cstraub69 on this board would be my first choice. Maybe he will chime in or try to send him a pm. www.straubtechnologies.com

[dc96819]

Ed Curtis
http://flowtechinduction.com/