What are the details of the motor that you are selling with it? Pics of the motor?
1977 Brendella Jet boat. Everything is new or refurbished. Available with motor or without. Below is a partial list of features:
1 inch stringers(full stringer boat). Heavy layup, good lake boat
Polished rail kit
detailed bilge & transom
brand new marine carpet
direct drive alternator mount
MPD tricked out pump, ready for triple digits. Pump is setback but did not break through transom.
Place diverter, droop, manual diverter control
All new cables for steering, diverter & accelerator & reverse gate.
Rex billet foot pedal
Rex billet fuel fills
Stainless Imco tanks(15 gallons each)
Auto Meter Gauges
Billet steering hub
Fresh GM white paint, no stress cracks.
Clean tandem axle trailer.
Full MSD marine ignition if sold with motor
All stainless hardware
7k with motor, 4500 obo without. Come and get it.
Detailed bilge
http://www.***boat.com/image_center/...Boat_81310.jpg
Interior(Boat is currently a two seater, but can be made into a four seater no problem.)
http://www.***boat.com/image_center/...oat_813071.jpg
Boat on trailer before rigging(sorry, shitty pic)
http://www.***boat.com/image_center/...2Paint_008.jpg
Boat on its maiden voyage. This is not the motor that I am selling with the boat...
http://www.***boat.com/image_center/...0/elsinore.jpg
Lots of pics available. Let me know if you want pics of anything else.
Call Brian at 949-838-5303. Delivery is possible.
What are the details of the motor that you are selling with it? Pics of the motor?
The motor is a Gen VI Big block Chevy 502. Dont know much about it. Stock as far as I know but runs really good. Electric fuel pump, Indmar exhaust or Basset headers(your choice)Has MSD 6 Maring ignition box with Probillet Distributor & MSD blaster coil. New starter, new alternator, roller cam.
Its in the boat I just bought and it runs good(will take you for a ride if you want to witness it running), Starts on the first bump. Awesome oil pressure. Im taking the motor out of the little boat and putting it in my new to me big boat, and vice versa.
Pics:
http://www.***boat.com/image_center/...0/P1010208.jpg
http://www.***boat.com/image_center/...0/P1010221.jpg
http://www.***boat.com/image_center/...0/P1010222.jpg
Almost forgot. Hull was blueprinted by Jeff Bennett. Bottom is a copy of Hondo Pantera. Very good bottom for going fast, not the best, but very far from the worst. Lots of these boats have delta pads on them. Since my goal was speed, Jeff recommended removing the delta pad so thats the route we went. Pump entry has been massaged and blueprinted as well.
will assist with delivery. Going up on ebay this week.
buehler?
nice looking boat for a fair price. as for the engine in the pics, it looks like a genVI not a gen V. the gen VI blocks are also fitted with a factory roller cam and lifters. look on the side of the block and see what numbers are casted between the freeze plugs. 7.4 or 8.2 you may have a 502 block if it runs that hard for a stock motor.
Can this boat be configured to seat more than 2?
nice looking boat for a fair price. as for the engine in the pics, it looks like a genVI not a gen V. the gen VI blocks are also fitted with a factory roller cam and lifters. look on the side of the block and see what numbers are casted between the freeze plugs. 7.4 or 8.1 you may have a 502 block if it runs that hard for a stock motor.
Damn, all I knew was that the block wasn't a gen 4, and figured luck would have it and be a gen V instead of a VI. Maybe Ill go buy a lotto ticket! Thanks Vic, Ill check it out tonight!
Can this boat be configured to seat more than 2?
Absolutely. It sat 4-5 when I got it. I just liked these seats. they are kinda laid back and very comfy. That plus the direct drive kill the back seat deal. Some minor changes and you will have room for 4-5.
A set of fiberglass buckets and a bench are what came with the boat originally.