Gear Heads

[H20MOFO]

Hi I'm A New Guy Here. Wondering If Anyone Can Give Me An Estimat Eon My Hp
427 Chevy, 11.6 To 1 Crower Cam # 1206 Bb2plus Brodix Heads.lift Intake .526 With 290 Dur. Exaust 536 Lift With 302 Dur. I Know Theres A Lot Of Variables. I Use 110 Octane And Have Bb2plus Brodix Heads(the 950 $1's Not The 1600 $ Cnc'd Ones)

[DEL51]

I will guess 570 hp at 6100rpm.

[pw_Tony]

600hp+
over 6000RPM

[obnoxious001]

I would say there are too many variables left out to even make an educated guess. Exhaust? intake? carburetion? flat tappet? hydraulic or solid?
Bear in mind what the SS guys spend on an engine to make 620HP or so, granted they are limited by spec heads, but they also run more compression, a bigger cam, special race headers, and maybe 7500 RPM's or more.

[H20MOFO]

Thanks For The Replys. I've Been Telling People Around 600 Just Wondering If I Was Close. Cam Crower 01206 Hyd. Through Transom Bassets. Edelbrock FOUR BARREL HIGH RISE- Ur2x Single 4 For Ithe Intake.(yeh Fuel Dist.sucks) Holly 800 Dp. Again Thanks.

[cfm]

Crower #01206
290°,302° Advertised Duration
232°, 242° Duration at .050"
.525", .537" lift with 1.7 rockers
108° LSA
Brodix BB-2 Plus
312cc Intake
BB-2 PLUS with 2.250 Intake / 1.880 exhaust
lift//intake cfm // exhaust cfm
.200"// 150// 122
.300"// 215// 148
.400"// 265// 187
.500"// 311// 216
.600"// 334// 229
.700"// 344// 238

[ck7684]

600HP seems highly optimistic in my opinion...I would guess closer to 400 something...450?? That cam isnt that big...but then again, I'm no expert...