Thanks for all the help guys.
A couple of years ago i bought a 92 20'8" arriva it has an alpha one outdrive 5.7L single carb, thru hull, msd ignition,and i'm currently running a 21" aluminum three blade. If the spedo is right i've topped it out at 62mph @5200rpm which is 600rpm above redline. I would like to get some more speed without sacrificing the engine. I was advised that for every additional 1" of propeller that i add, i will decrease rpm by 200.
So should i be looking for a 23", a 3or a 4 blade, stainless or aluminum?
Thanks for all the help guys.
4 blade, stainless 22p
you need to give
gear ratio for more acurat info
Lose the aluminum prop.
As mike37 suggested,try a 22p,rev4,bravo1,etc
Best thing to do id contact a reputable prop shop in your area and arrange to try out a couple of different props...
good luck,let us know how it turns out.
playdeep:
Lose the aluminum prop.
As mike37 suggested,try a 22p,rev4,bravo1,etc
Best thing to do id contact a reputable prop shop in your area and arrange to try out a couple of different props...
good luck,let us know how it turns out. Ya. What he said
Thanks for the help. (i actually mean it this time) I'll definately keep yal informed.
doyle
Next time post your qustion in
Gear Heads or out drive tach
you will get a faster responce
I have a similar size/power boat that I run a 23 cleaver. Also had a 24 turbo.