The company I work for needs to test some scaffold frames. We need a facility with a press that can measure the loads on roughly 20' (vertical) of scaffold. We're basically testing the load the scaffold can accommodate to initial deflection and to permanant damage. Most local facilities we've used or contact can only accommodate 10' or so.
Here is a 1 frame high test. We need to go 3 frames high.
http://www.***boat.com/image_center/...-24-07_029.jpg
http://www.***boat.com/image_center/...-24-07_013.jpg
Post or PM any leads.
Thanks!
-Justin